Radware Alteon, Инструкция по применению

Страница: 429 / 842

Alteon Application Switch Operating System Application Guide
ADC-VX Management
Document ID: RDWR-ALOS-V2900_AG1302
429
The following example displays information for a shared interface:
Importing the Active ADC Configuration
The vADC Administrator and the Global Administrator can import configurations from one ADC form
factor to another:
• The vADC Administrator import tasks include:
— Restoring the Active Configuration of an Existing vADC, page 429
• The Global Administrator import tasks include:
— Performing a Complete System Recovery, page 430
— Importing vADC Configuration Files to an Existing vADC, page 430
— Creating a New vADC from Configuration Files of a Physical ADC, page 432
For both administrators, the file can contain a full ADC configuration or a partial ADC configuration.
Restoring the Active Configuration of an Existing vADC
The vADC Administrator can restore the active configuration of an existing vADC.
To restore the active configuration of an existing vADC
Access the Active Switch Configuration Restoration menu and configure the following
parameters:
>> VLAN 300# shared
Current Enabled VLAN sharing: disabled
Enter new Enabled VLAN sharing [d/e]: e
>> VLAN 300# ena
Current status: disabled
>> vADC 1# add 300
Current vADC 1 Layer2 interfaces: 100
Pending new vADC 1 Layer2 interfaces: 300
>> vADC 1# apply
>> Global - Layer 2# vlan
VLAN Name VADCs Status Learn Shared Ports
---- -------------------- ------------- ------ ----- ------ -----
1 Default VLAN ena ena dis 1-14 16
3 VLAN 3 ena ena dis empty
100 VLAN 100 1 ena ena dis 16
300 VLAN 300 1 ena ena ena 15
Configuration# gtcfg <hostname> <filename> <-tftp | username password> [-mgmt
| -data] <scp>