Radware Alteon, Инструкция по применению

Страница: 240 / 842

Alteon Application Switch Operating System Application Guide
Server Load Balancing
240
Document ID: RDWR-ALOS-V2900_AG1302
2. Access and then enable URL path change.
3. Depending on the action type, enter the required parameters.
4. Enter the page name and path type to be used for the path change.
Example
To change links in server responses with paths starting with “abcd” to start with “aaabcd”, use the
following configuration:
>> Main# /cfg/slb/virt 1/service 80/http/urlchang
>> Enter enabled/disabled or clear [e|d|c] [d]: e
>> Enter hostname match type [sufx|prefx|eq|incl|any] [any]: eq
>> Enter hostname to match: www.a.com
>> Enter path match type [sufx|prefx|eq|incl|any] [any]: eq
>> Enter path to match: www.path.com
>> Enter page name to match or none []: test
>> Enter page type to match or none: html
>> Enter path action type [insert:replace:remove:none]:
Table 24: URL In Server Responses Action Parameters
Action Action Parameters
None No action is taken.
Continue to the next step
Remove The matched path section is removed.
Continue to the next step
Insert The following path section is inserted.
>> Enter path to insert []:
>> Insert the specified path before or after the matched section?
[b/a]:
Replace The following path section is removed.
>> Enter new path to replace the matched section:
>> Enter new page name or none []: newpagename
>> Enter new page type or none []: html