manualshive.com logo in svg

Radware Alteon, Инструкция по применению

Поделиться
Скачать
Radware Alteon Скачать руководство пользователя страница 388

Alteon Application Switch Operating System Application Guide

 

Filtering and Traffic Manipulation

388

 Document 

ID: 

RDWR-ALOS-V2900_AG1302

FTP Client NAT

Alteon provides NAT services to many clients with private IP addresses. An FTP enhancement lets 
you perform true FTP NAT for dynamic NAT.
Because of the way FTP works in active mode, a client sends information on the control channel 
(information that reveals their private IP address) out to the Internet. However, the filter only 
performs NAT translation on the TCP/IP header portion of the frame, preventing a client with a 
private IP address from performing active FTP.
Alteon can monitor the control channel and replace the client 's private IP address with a proxy IP 
address defined on Alteon. When a client in active FTP mode sends a port command to a remote FTP 
server, Alteon analyzes the data part of the frame and modifies the port command as follows:

•

The real server (client) IP address is replaced by a public proxy IP address.

•

The real server (client) port is replaced with a proxy port.

Figure 62:  FTP Client NAT Example

You may directly connect the real servers to Alteon if the total number of servers is less than or 
equal to the ports.

To configure active FTP client NAT

Note:

The passive mode does not need to use this feature.

1. Make sure that a proxy IP address is enabled on the filter port.
2. Make sure that a source NAT filter is set up for the port:

>> # /cfg/slb/filt 14

(Select the menu for client filter)

>> Filter 14# invert ena

(Invert the filter logic)

>> Filter 14# dip 10.10.10.0

(If the destination is not private)

>> Filter 14# dmask 255.255.255.0

(For the entire private subnet range)

Содержание Alteon











































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды