manualshive.com logo in svg

Radware Alteon, Инструкция по применению

Поделиться
Скачать
Radware Alteon Скачать руководство пользователя страница 521

 

Alteon Application Switch Operating System Application Guide

High Availability

Document ID: RDWR-ALOS-V2900_AG1302

 

521

Failover Methods and Configurations

Alteon has the flexibility to implement redundant configurations. 
High availability configurations are based on VRRP. VRRP implementation includes proprietary 
extensions to accommodate Layer 4 though Layer 7 load balancing features. 
This section describes a few of the more useful and easily deployed configurations, including:

•

Active-Standby Redundancy, page 521

•

Active-Active Redundancy, page 527

•

Hot Standby Redundancy, page 535

•

Tracking Virtual Routers, page 542

•

Service-Based Virtual Router Groups, page 543

Note:

The current configurations described in this section are valid without session synchronization.

Active-Standby Redundancy

This section describes the following topics:

•

Active-Standby Environments, page 521

•

Configuring Active-Standby Redundancy, page 522

Active-Standby Environments

In an active-standby configuration, the active switch supports all traffic or services. The backup 
switch acts as a standby for services on the active master switch. If the master switch fails, the 
backup switch takes over processing for all services. The backup switch may forward Layer 2 and 
Layer 3 traffic, as appropriate.
Radware recommends that you do not allow sharing between the Alteon devices. Without sharing, 
only the active Alteon performs load balancing. This is a very robust configuration that does not 
require dedicated interswitch links (ISL), or hotstandby settings on ports. 

Note:

In an active-standby configuration, the same service cannot be active simultaneously on 

both devices.

Содержание Alteon











































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды