Before you begin
Before upgrading your video network devices, including endpoints, do the following:
•
Before upgrading a video device software, back up its configuration by retrieving its
configuration file. For more information on remote backups, see the .
•
Go to http://licensing.radvision.com/ to apply for and download your upgrade package.
•
If you upgrade to a major version, ensure you have a new license key. The upgrade
procedure is different when upgrading to a major new version compared with smaller
incremental upgrades. See
Updating License Keys of RADVISION MCUs or Gateways
details.
•
Navigate to the device and select the Access tab. Enter a name and password for
automatic login to the video device during the upgrade process. We recommend using the
same name across the deployment.
Procedure
Step 1
Access the SCOPIA Management administrator portal.
Step 2
Select the Devices tab.
Step 3
Locate the video device as explained in the Administrator Guide for SCOPIA Management.
Step 4
Select the device to be upgraded.
Step 5
Select Manage > Upgrade Software.
Figure 7-1
Upgrading the software file of a device
Step 6
At the prompt, select OK to shut down the video device for a few minutes. This disconnects
all active calls.
Step 7
If there is no upgrade package in the dialog box, select Add.
Step 8
Select Browse to search for the package you want to upload.
RADVISION | Deployment Guide for SCOPIA TIP Gateway Version 8.0
Performing Maintenance Procedures | 68
