Note
The CTMS is considered as an endpoint in the SCOPIA Management setup.
Procedure
Step 1
Access the SCOPIA Management administrator portal.
Step 2
Select the Endpoints tab.
Step 3
Select Add > Add manually.
The Add Endpoint window appears.
Step 4
Select the Cisco telepresence system in the Type list.
Figure 5-8
Cisco CTMS Configuration screen
Step 5
Configure the CTMS as described in this table.
Table 5-4
Configuring the CTMS
Field Name
Description
Name
Enter a name used to identify the CTMS. This name is displayed in
the list of endpoints.
Description
Enter any description text that you may have for the CTMS.
Protocol
This field is pre-configured to IP (SIP) since the CTMS uses the SIP
protocol.
RADVISION | Deployment Guide for SCOPIA TIP Gateway Version 8.0
Configuring your SCOPIA Solution for Interoperability with Cisco Telepresence | 35
