Figure 4-3
Removing the Phillips screws on the side panel
Step 3
Attach the brackets on each side of the device side panel with the Phillips screws. See
Figure 4-4
Aligning the bracket with the SCOPIA TIP Gateway front panel
Marking the Location of the Device-fixing Cage Nuts
There is a pair of cage nuts, one for each front-facing rack post. You need these cage nuts to
fix the device brackets to the post.
Before attaching the cage nuts to the rack, mark where you plan to attach them, so you can
be sure they are level and properly placed.
RADVISION | Deployment Guide for SCOPIA TIP Gateway Version 8.0
Setting up the SCOPIA TIP Gateway | 16
