Radiant SFK 55, Инструкция по установке, эксплуатации и обслуживанию

Страница: 42 / 76

42
SFK 55 - RAD - ING - Manual - 1512.2_CSA_TTS
2. FIRST START-UP
SUPPOR
T CENTER
PARAMETER DESCRIPTION RANGE FUNCTION
P16 DIFFERENTIAL OF THE STORAGE TANK CYCLE
ACTIVATION
THROUGH THIS PARAMETER YOU CAN
ANTICIPATE THE PRE-HEATING FUNCTION
OF THE STORAGE TANK, COMPARED TO THE
D.H.W SET POINT PRE-SET BY THE END-
USER, BY MODIFYING THE TEMPERATURE
DIFFERENCE.
1 - 20 VALUE EXPRESSED IN °C (FACTORY SET AT 5°C)
P17 MINIMUM D.H.W FLOW RATE SETTING
THROUGH THIS PARAMETER YOU CAN
SET THE MINIMUM D.H.W. FLOW RATE
NECESSARY TO ACTIVATE THE WATER
HEATER.
THE VALUE IS PRE-SET BASED ON THE SET
POWER (SEE PARAMETER P00).
20 - 68 VALUE EXPRESSED IN HERTZ
(FACTORY SET AT 30 HZ = 0.55 GPM (2.1 L/MIN)
P18 ADDITIONAL POST-VENTILATION TIMING
THROUGH THIS PARAMETER YOU CAN SET
A PERIOD OF OPERATION, ADDITIONAL TO
THE 20 STANDARD SECONDS OF THE FAN,
AFTER THE BURNER SHUTDOWN.
20 - 120 VALUE EXPRESSED IN SECONDS (FACTORY SET AT 30
SECONDS)
P19 ANTI-WATER HAMMER SELECTION
ONCE THIS FUNCTION IS ENABLED, THE
D.H.W CONTACT WILL BE DELAYED FOR A
TIME EQUAL TO THE SET VALUE.
0 - 20 0 = DISABLED (FACTORY SET AT 0’)
1-20 = VALUE EXPRESSED IN SECONDS
P20 DESTINATION COUNTRY SELECTION
BY MODIFYING THIS PARAMETER THE
COMBUSTION CONTROL PARAMETERS
WILL BE AUTOMATICALLY CONFIGURATED,
ACCORDING TO THE VALUES FIXED IN THE
DESTINATION COUNTRY OF THE PRODUCT.
0 - 1 0 = U.S.A.
1 = DIFFERENT COUNTRY
P21
PUMP OPERATION IN WATER HEATER MODE
THROUGH THIS PARAMETER YOU CAN
ACTIVATE/DEACTIVATE THE CIRCULATING
PUMP DURING THE NORMAL OPERATION
OF THE WATER HEATER.
0 - 1 0 = DISABLED
1 = ENABLED