Radiant RK 100, Инструкция по эксплуатации

Страница: 29 / 72

INSTALLATION INSTRUCTIONS
RK 100 - RAD - ING - MAN.INST - 1311.1 - DIGITECH CS MIAH4
25
wiring by the installer
BIPOLAR SWITCH
BREAKER GENERAL
brown
yellow/green
blue
IG
power supply
230V 50Hz
L N
2x16A
1
2
3
4
A
B
Se
Se
Ta
N
L
Ta
S
Fig. 1
3.8.2 Power supply connection
Connect the power supply to the terminal board inside the control panel as follows:
a. Switch off the power supply at the main switch.
b. Remove the front case panel of the boiler.
c. Slacken the screws and remove plate A (see fig. 1).
d. With the plate removed, connect the wires to the terminal board B as follows:

Connect the earth wire (normally coloured green/yellow) to the terminal marked with the earth symbol “ “.

Connect the neutral wire (normally coloured blue) to the terminal marked with the letter “N”.

Connect the live wire (normally coloured brown) to the terminal marked with the letter “L”.

Terminals identified by the letters: Ta

Room thermostat
Se

Outside temperature sensor
When the wires have been connected, place plate “A" back to position.