INSTALLATION INSTRUCTIONS
RK 100 - RAD - ING - MAN.INST - 1311.1 - DIGITECH CS MIAH4
18
3.5.2 Fixing the boiler to wall.
The appliance must be installed exclusively on a flat vertical solid wall capable of supporting its
weight
.
To avoid the condensate stagnation within the condensing exchanger, make sure that the boiler is
slightly inclined to the rear (Slope = 4°) to allow the correct draining of the condensate.
To fix the boiler to wall follow this instruction:
1.
Check that the spacer A (fig.1) is installed in the boiler to ensure the correct installation slope of 4° compared to
the installation wall (fig. 2) and to avoid any condensate stagnation within the condensing exchanger;
2.
Fix the external part of the mounting bracket to wall (fig. 1) using proper screw anchors and following the
distances shown in fig.3;
3.
Insert the inner guide of the mounting bracket;
4.
Hang the boiler onto the special hooks;
5.
Once the fixing is completed check that the 4° slope (fig. 2) is respected;
staffa supporto caldaia
staffa distanziale
74304LP
74300LP
76
7
Fig. 1
Fig. 2
Fig. 3
Содержание RK 100
Страница 2: ......
Страница 71: ...MAINTENANCE INSTRUCTIONS RK 100 RAD ING MAN INST 1311 1 DIGITECH CS MIAH4 67...
