Instruction manual Wav WaveGuide Server
The WaveGuide Server
The WaveGuide Server (WGS) is available in two versions an IP67 version and a rack mount version. The IP67
version is a 190 x190 mm polycarbonate box. Connectors, buttons and display are all on one side. Cables are fed
via a removable cover plate. The rack mount version has a 19'' front panel (2U height). It has the push buttons and
the display at the front and the connectors at the back side.
Most connections can be made via two 10 pole screw connectors.
The
right connector
is to connect the radar and the supply.
●
Pins 1,2 and 3 are to be connected to the corresponding terminals 1,2 and 3 in the radar. The link is
RS485.
●
To facilitate a “one cable” connection to the radar it is also possible to feed the radar from the WGS by
pins 4 (+) and 5 (-). The power via these pins is switched on and of by the main switch of the WGS.
●
Via pin 7(+) and 8(-) of the right plug the WaveGuide Server is powered by 24VDC (18 – 36VDC)
●
Pin 9 and 10 are connected with the housing of the WGS in order to connect a protective ground.
Version 4.1
8 of 30
Oct 2013
Fig 7: The WaveGuide Server IP67 version
Fig 8: WaveGuide Server rack mount version.
Fig 9: The connector block.
