Rad Power Bikes RadRover, Руководство пользователя

Страница: 36 / 48

34
Pre-Ride Safety Checklist
Notice: Before every ride, and after every 25-45 miles, we advise following the pre-ride safety checklist in the table below.
Safety Check Basic Steps
1. Brakes
o
Ensure front and rear brakes work properly.
o
Check brake pads for wear and ensure they are not over-worn.
o
Ensure brake pads are correctly positioned in relation to the rims.
o
Ensure brake control cables are lubricated, correctly adjusted, and display no obvious
wear.
o
Ensure brake control levers are lubricated and tightly secured to the handlebars.
o
Test brake levers are firm and that brake, motor cutoff functions, and brake light are
functioning properly.
2. Wheels and Tires
o
Ensure tires are inflated to within the recommended limits displayed on the tire
sidewalls and holding air.
o
Ensure tires have good tread, have no bulges or excessive wear, and are free from any
other damage.
o
Ensure rims run true and have no obvious wobbles, dents, or kinks.
o
Ensure all wheel spokes are tight and not broken.
o
Check axle nuts and front wheel quick release to ensure they are tight. Ensure the
locking lever on the quick release skewer is correctly tensioned, fully closed, and
secure position.
3. Steering
o
Ensure handlebar and stem are correctly adjusted and tightened and allow proper
steering.
o
Ensure the handlebar is set correctly in relation to the forks and the direction of travel.
4. Chain
o
Ensure the chain is oiled, clean, and runs smoothly.
o
Extra care is required in wet, salty/otherwise corrosive, or dusty conditions
5. Bearings
o
Ensure all bearings are lubricated, run freely, and display no excess movement,
grinding, or rattling.
o
Check headset, wheel bearings, pedal bearings, and bottom bracket bearings.
6. Cranks and Pedals
o
Ensure pedals are securely tightened to the cranks.
o
Ensure the cranks are securely tightened and are not bent.
7. Derailleurs
o
Check that the derailleur is adjusted and functioning properly.
o
Ensure shifter and brake levers are attached to the handlebar securely.
o
Ensure all brake and shift cables are properly lubricated.