Rad Power Bikes RadRover, Руководство пользователя

Страница: 11 / 48

9
STEP 7:
Install Headlight as shown in assembly video from www.radpowerbikes.com/help . Carefully align and connect the
waterproof connector joining the headlight to the wiring harness. The headlight should be adjusted to illuminate the road ahead
and not blind oncoming traffic.
The headlight is equipped with a light sensor which will automatically dim the headlight when riding during day to save power.
The sensor is covered by a switch on the back of the headlight (above, at right). When the small opaque sensor is covered, the
headlight, when on, will be full brightness, daytime and nighttime. If the sensor is exposed as shown (above, at right), the
headlight, when on, will automatically dim during the day, and be fully bright when it is dark out. Select either option based on
preference.