Rad Power Bikes RadRover, Руководство пользователя

Страница: 14 / 48

12
Adjusting the Seat Height
For most users, the seat height should be set by placing the ball of their foot on the pedal when the crank is at its lowest point. In
this orientation their leg should almost be fully extended, with a slight bend at the knee.
1) Open the quick release lever by swinging the lever open and outwards about 180 degrees (depicted below, left).
2) Move the seat up and down by sliding the seat post in or out of the seat tube. Set the desired seat height.
3) After tightening the adjustment nut (opposite the quick release lever) on the seat post quick release properly, close the
quick release lever by swinging the lever back 90 degrees until it looks like the image below (at right) and the seat cannot
move up, down, to the left, or right.
Before using the bike, always check to ensure all latches, levers, and quick releases are properly secured and undamaged.
Check that they are correctly secured before every ride and after every time the bike is left unsupervised, even for a short
time. Otherwise, the handlebar stem and/or seat post may come loose and can result in loss of control, damage to the
bike, property, serious injury, and/or death.