Rad Power Bikes RadRover, Руководство пользователя

Страница: 19 / 48

17
When the Battery Is Removed
o
Ensure the battery is turned off whenever it is being removed or off the bike.
o
Do not touch the “+” and “ - ” terminal con tacts on the bottom of the battery when the battery is removed from the bike.
o
Be careful not to drop or damage the battery when loose from the bike.
o
Be careful to avoid damaging the exposed connector terminals and keep them clear of debris.
Use caution to avoid damage to battery connector terminals, which are exposed when the battery is unlocked and
removed from the frame of the bike. In the case of damage to the terminals or battery mounts, please discontinue use
and contact Rad Power Bikes Technical Support immediately.
When Installing the Battery onto the Bike
o
Ensure the battery is turned off before sliding the battery into the frame mount receptacle.
o
Do not force the battery onto the receptacle; slowly align and push the battery down into the receptacle.
o
Ensure the battery has been properly secured to the bike before each use by carefully pulling upwards on the battery
with both hands to test the security of the attachment of the battery to the mount.
Charging Time
When the input and output plugs of the charger are connected properly, and the battery is not fully charged, the red charging
indicator light should illuminate, indicating the battery is charging. The time the charger takes to fully charge the battery is
dependent on various factors including distance traveled, riding characteristics, terrain, payload, and battery age. The following
table provides an estimate of charge time based on most common distances traveled in regular operation:
Distance Traveled Estimated Time to Fully Recharge
5 mi (8 km) 1 hour
10 mi (16 km) 1.5 hours
15 mi (24 km) 2.5 hours
20 mi (32 km) 3.5 hours
25 mi (40 km) 4.5 hours
20 mi (48 km) 5.5 hours
45 mi (72 km) 7 hours