Rad Power Bikes RadRover, Руководство пользователя

Страница: 6 / 48

4
Safety Check Before Each Ride
Always check the condition of your bike before you ride in addition to having regular maintenance performed. If you are unsure
of how to conduct a complete check of the condition of your bike before every ride, you should consult a certified, reputable bike
mechanic for assistance. See the Pre-Ride Safety Checklist for more information.
Electrical System
The electrical system on your RadRover offers various levels of power assistance and lighting for different operating conditions
and user preferences. It is critical that you familiarize yourself with all aspects of your RadRover
’ s electrical system and check to
see that it is working correctly before every ride. The front and rear brake levers contain safety power cutoff switches, which
disable the hub motor
’ s assistance when applied, and both levers should be checked for correct operation. The throttle should
provide smooth acceleration when gradually applied. If the throttle, brake lever cutoff switches, pedal assistance, or lighting is
not functioning normally, intermittent, or not working, please discontinue using your RadRover immediately and contact the Rad
Power Bikes Technical Support team for assistance.
Brakes
Ensure brakes are working correctly, all braking system components are free from damage, and properly secured. When you fully
squeeze the brake levers, ensure neither the front or rear brake levers touch the handlebar. Take your bike to a certified,
reputable bike mechanic to have the brakes repaired if you find a problem.
Tires and Wheels
Your wheels should always spin straight and must be repaired or replaced if they wobble side to side or up and down when
spinning. If your wheels become untrue or spokes loosen, do not attempt to true or tighten unless you have adequate knowledge,
tools and experience. It is recommended that a certified, reputable bike mechanic performs all wheel tuning and truing
operations on your bike from Rad Power Bikes. Ensure your tires and inner tubes are in good working condition without any
visual damage and have the correct amount of air pressure. Always replace tires and inner tubes with punctures, cuts or damage
before you ride. Tires without the correct amount of air pressure can reduce performance, increase tire and component wear,
and make riding your bike unsafe.