Rad Power Bikes RadRover, Руководство пользователя

Страница: 38 / 48

36
Recommended Service Intervals
Regular inspection and maintenance are key to ensure Rad Power Bikes function as intended, and to reduce wear and tear on
their systems. Recommended service intervals are meant to be used as guidelines. Real world wear and tear, and the need for
service, will vary with conditions of use. We generally recommend inspections, service, and necessary replacements be
performed at the time or mileage interval that comes first in the following table.
Interval Inspect Service Replace
Weekly,
100-200
miles - Check hardware for proper torque: See
Recommended Torque Values chart.
- Check drivetrain for proper alignment and function
(including the chain, freewheel, chainring, and
derailleur).
- Check wheel trueness and for quiet wheel
operation (without spoke noise).
- Check condition of frame for any damage. - Clean frame by wiping frame
down with damp cloth.
- Use barrel adjuster(s) to tension
derailleur/brake cables if needed. - Replace any components
confirmed by Rad Power Bikes
Technical Support or a
certified, reputable bike
mechanic to be damaged
beyond repair or broken.
Monthly,
250-750
miles - Check brake pad alignment, brake cable tension.
- Check bike is shifting properly, proper derailleur
cable tension.
- Check chain stretch.
- Check brake and shifter cables for corrosion or
fraying.
- Check spoke tension.
- Check accessory mounting (rack mounting bolts,
fender hardware, and alignment). - Clean and lubricate drivetrain.
- Check crankset and pedal torque.
- Clean brake and shift cables.
- True and tension wheels if any
loose spokes are discovered.
- Replace brake and shift cables
if necessary.
- Replace brake pads if
necessary.
Every 6
Months,
750-1250
miles - Inspect drivetrain (chain, chainring, freewheel, and
derailleur).
- Inspect all cables and housings. - Standard tune-up by certified,
reputable bike mechanic is
recommended.
- Grease bottom bracket. - Replace brake pads.
- Replace tires if necessary.
- Replace cables and housings if
necessary.