![background image](http://html1.mh-extra.com/html/sidewalker/willy/willy_final-assembly-instructions_1264893001.webp)
Willy Sidewalker—Final Assembly Instructions
Thank you and congratulations on your purchase of a 20"
Willy Sidewalker.
The Willy Sidewalker comes 70% pre-assembled. Below are the final
assembly instructions.
They are intended for DIY customers
.
NOTE: If any part of the instructions is unclear, or if you are new to final
bike assembly and are unable to get help from a friend, or if you prefer
to let a professional do it, we recommend that you take the Willy
Sidewalker to a local area bike shop for final assembly and safety
inspection. (It is approximately 20 to 30 minutes work for a bike
mechanic.)
You will need: #6 and #5 Allen key, wire cutter.
PACKING LIST
:
Open the box and ensure you have the following:
1) Frame with front and rear brakes, attached foot platform, rear brake
cable/cable housing.
2) Two identical wheel sets
3) Handlebar/stem with hand grips, brake levers and bell.
4) Small box or plastic bag with hardware inside.
5) Front and rear wheel fenders.
Inside the small box or plastic bag:
1) Quick release hubs, front and rear
2) Front brake cable/cable housing.
3) Screws for fenders, front and rear.
4) Reflector with nut and washer.
5) Two 90 degree “noodles”: the rigid one for front brake, flexible one for
rear brake.
6) Two cable ends.
THE FINAL ASSEMBLY
:
1) Wheels: Insert quick release hub and position wheel into the front
fork and tighten. Repeat for rear wheel.
2) Handlebar/stem assembly: Slide the handlebar/stem into the
downtube to desired height, and lock with #6 Allen key.