Rabe Pavo V 140, Руководство по эксплуатации

Страница: 92 / 102

a
1
1
2
1
92
PAVO V140 / VHA 140
09.2011
19.3 Replacing the shear bolt of
the subsoil decompactor
Undo the fixing bolt ( 1 , WAF* 24 mm).
Insert a new shear bolt ( 2 , WAF* 24 mm)
and tighten.
Tighten the fixing bolt.
Observe the tightening torques!
See “Torques” on page 80.
►
►
►
Fig. 118: Folding up the subsoil decompactors
19.2 Replacing the skimmer shear bolt
Every leg is fitted with a shear bolt.
In the event that a shear bolt is broken, it must
be replaced.
Bolt size:
shear bolt = M16 x 60 mm (WAF 24 mm)
Always use original shear bolts.
Risk of crushing
Only approach the plough body
from the rear. There is a risk of
crushing when the plough body
swivels back.
Risk of injury
Risk of injury due to heavy and
sharp-edged components.
Gloves should always be worn.
Risk of accident
Risk of accident due to loose
shear bolts.
When replacing shear bolts,
always use self-locking nuts.
•
•
•
NOtE
Replacement shear bolts are
housed in the cross tube ( a ) on
the tower!
Always insert the shear bolt
with the head pointing towards
the leg side.
Insert a new shear bolt ( 1 , WAF* 24
mm) and tighten.
After inserting a new shear bolt, tighten
the second shear bolt.
Observe the tightening torques!
See “Torques” on page 80.
•
•
►
►
Fig. 117: Replacing the shear bolt
Fig. 116: Replacement shear bolts
Repair