Rabe Pavo V 140, Руководство по эксплуатации

Страница: 67 / 102

W1
1
2
3
67
PAVO V140 / VHA 140
09.2011
11.3.5 Changing the first plough body working width - Ploughing in the furrow
W1 = First plough body working width
(1) = Parallelogram cylinder
Second plough body bracket (
2 )
Parallelogram frame (
3
)
Fig. 85: First plough body working width
Operating information Operation
Button or tractor hydraulics
Display
Set first plough body working width
narrower:
Press the “Track position forwards”
button.
►
Furche
S p u r e i n -
s t e l l u n g
v o r w ä r t s :
M i t S t e u e r g e r ä t g r ü n
K ö r p e r 1 i n A r b . - P o s
or
Set first plough body working width wider:
Press the “Track position backwards”
button.
►
Furche
S p u r e i n -
s t e l l u n g
r ü c k w ä r t s :
M i t S t e u e r g e r ä t g r ü n
K ö r p e r 1 i n A r b . - P o s
Actuate the control device - green
- until the required first plough body
working width ( W1 ) has been set
narrower or wider.
The parallelogram cylinder ( 1 ) moves
into position.
►
Damage to the plough by reducing
the first plough body working width.
When reducing the first plough body
working width to the set special
working width (26 - 4 cm), there is
a risk that the second plough body
bracket ( 2 ) will strike the parallelogram
frame ( 3 ).
Only change the first plough body
working width when normal working
width (35 - 55 cm) is set.
•
To switch off:
Press the “Track position forwards” button
or
the “Track position backwards” button
again.
►
►
or
Eine Taste drücken
Furche
PAVO
Furrow edge
Centre of tractor
Centre of bearer
Working in the field - Furrow