Rabe Pavo V 140, Руководство по эксплуатации

Страница: 65 / 102

a
1
D
P P
3
2
65
PAVO V140 / VHA 140
09.2011
11.3.3 Setting the working depth -
Furrow and on-land
Working in the field
Operating information Operation
Button or tractor hydraulics
Display
Press the “Working depth” button. ►
Furche
A r b e i t s -
t i e f e
e i n s t e l l e n
:
M i t S t e u e r g e r ä t g r ü n
T i e f e e i n s t e l l e n .
or
Onland
A r b e i t s -
t i e f e
e i n s t e l l e n :
M i t S t e u e r g e r ä t g r ü n
T i e f e e i n s t e l l e n .
Actuate the control device - green
(+/-) - until the required working depth
has been reached.
►
To switch off:
press the “Working depth” button
again.
►
Adjust the bottom link height.
Set the top link shorter or longer. ►
►
The working depth ( D ) is set using the
combination wheel ( 1 ).
So that the plough runs parallel ( P ) to
the ground, the height of the bottom links
(
2
) and the length of the top link (
3
) must
be adjusted from the tractor.
(D) = Working depth
(P) = Plough frame parallel to the ground
the top link (3) should:
be slightly inclined towards the tractor
be positioned at the front of
the elongated hole ( a ) without tension.
•
•
Fig. 81: Working depth
Fig. 82: Position of the top link in the elongated hole