Rabe Pavo V 140, Руководство по эксплуатации

Страница: 47 / 102

t
1
a
b
App
rox.
20 m
m
47
PAVO V140 / VHA 140
09.2011
9.5.6 track setting of first plough body (track gauge)
The track setting of the first plough body
corresponds with the working position of
the first plough body.
The track ( t ) to the first plough body is
measured from the centre of the bearer up
to the attachment of the first plough body.
It should be max. 1.4 m.
If the track gauge is larger than this,
working width adjustment can only be
used to a limited extent (limit stop of
the cylinders).
t = track gauge
( 1 ) = Parallelogram cylinder
Fig. 43: track gauge
Operating information Operation
Button or tractor hydraulics
Display
Press the “Track position forwards”
button.
►
Onland
S p u r e i n -
s t e l l u n g
v o r w ä r t s :
M i t S t e u e r g e r ä t g r ü n
K ö r p e r 1 i n A r b . - P o s
Actuate the control device - green -
until the first plough body has reached
the required track gauge (
t
).
The parallelogram cylinder ( 1 )
extends.
►
Display changes
Onland
D a n a c h
Setting suggestion:
So that all settings can be used
optimally, adjust the track as follows:
Extend the parallelogram cylinder
until the indicator ( a ) is a distance
of approx. 20 mm from the revolving
marking ring ( b ) for the turn setting.
►
Fig. 44: Setting distance
Continued on next page
Furrow edge
Centre of tractor
Centre of bearer
Preparation for use - On-land