SDC2000
29 / 40
User Manual
Rev. 1.0 - 12/04/05
•
RT[01] This field lets you select one of the radio texts
stored in the memory.
•
F [B] This field lets you select the type of message
("A" or "B"). Radio receivers have a flag that changes
status when the message changes, if the message is
type B.
•
[02] This field, combined with the previous field, shows
the number of attempts before moving to the next
message.
•
RADIO TEXT... This field has 64 characters that can
be edited using standard ASCII characters.
[AF]
In this submenu, you may use the knob to view and set
transmitted Radio Text.
Move back to exit the clock setting window; move forward
to access edit mode for available parameters.
Use the knob to move the cursor to the parameter you
wish to edit; when cursor is on the parameter, push the
encoder and edit as required.
•
AF[001] This field indicates the list being edited. You
may edit lists up to 1000 bytes maximum. A 25-
frequency list of type "A" will use 26 bytes; a 12-
frequency list of type "B" uses 25 bytes.
•
HEAD [---.-] When a list is entered into this field, it
becomes type "B"; the blank field indicates type "A".
When type is changed from "A" to "B" or viceversa, the
list will not reflect this change immediately.
•
---.- Entering a list into this field adds one frequency to
the list. A frequency can be entered at any position, when
the frequency is confirmed, the list is sorted and
duplicate frequencies are deleted. This convenient
feature enables the operator to type frequencies in a
random order and in any blank field.
[messag]
In this submenu, you may use the knob to view PSN data settings.
