SDC2000
4 / 40
User Manual
Rev. 1.0 - 12/04/05
The digital input/output section supports S/PDIF, AES/EBU (sampling frequencies
from 32 to 96 KHz ) and EIAJ CP340/1201 data format.
The top-quality analogue input/output section supports digital system response in
terms of high input dynamics, high signal-to-noise ratio and very low distortion. Two
buffered MPX outputs, each with independent levels, maintain best stereo separation
even when load is as low as 50 Ohm.
The machine features an optimised ground distribution system (Audio and chassis )
to avoid ground loops.
The SDC2000 design is based on a modular concept: the different functions are
performed by modules that are either connected directly (male connector of one
module attached to female connector of another module) or through flat cables
terminated by connectors. This design facilitates maintenance and module
replacement.
/SFN option
(Specifically designed for isofrequency applications)
The SDC2000/SFN enables isofrequency operation (SFN, Single Frequency
Networks) throughout the country; in other words, the same transmission frequency
can be used for transmitters that have partially overlapping coverage areas.
The SDC2000/SFN implements a supplemental technology that uses a delay on all
inputs (Left, Right, MPX and AES/ EBU) to provide optimised frequency planning as
well as an integrated GPS (that enables 1 ppm synchronisation on pilot frequency
and delays).
