SDC2000
27 / 40
User Manual
Rev. 1.0 - 12/04/05
[set-up]
In this submenu, you may use the knob to view PSN data settings.
Move back to exit the clock setting window; move forward to access
edit mode for available parameters.
Use the knob to move the cursor to the parameter you wish to edit;
when cursor is on the parameter, push the encoder and edit as
required.
DI [...]
Push the encoder when this item is blinking to change
Di status; there are 16 options available.
•
"St" or "Mo" identifies the type of station: stereo or
mono
•
"Ar" or "Nr" means normal or artificial
•
" " or "C" means normal or compressed
•
"s" or "d" means static or dynamic PTY
PS [...]
Push the encoder when this item is blinking to change
the station name broadcast to the radios.
This field contains 8 alphanumeric characters that can
be edited separately.
PI [5100]
If the encoder is pushed when in this submenu, field
[BACK] begins to blink and you will be able to move the
cursor from field to field by turning the knob in the desired
direction.
Push the encoder again when a field is selected to
confirm that you wish to edit the current selection.
This submenu lets you view and edit PI parameters.
•
PI[526F] This field cannot be edited and simply shows
selection outcome.
•
NUMBER [111] This field is the editable station code.
It is shown in digital format in field PI, with the
hexadecimal value ranging from 0 to 255; the figure
shows that hexadecimal value 111 is the equivalent of
the last hexadecimal characters in field PI.
