QuercusVL Programming Manual
○
QUEUE: queue detector.
○
SPEED: speed detector.
●
AreSummariesEnabled: indicates if summaries should be generated. 0, disabled; 1,
enabled.
●
SendSummaries: indicates if summaries should be sent to the central system.
0, disabled; 1, enabled.
●
SendRealTimeInfo: indicates if events should be sent to the central system.
0, disabled; 1, enabled.
●
Coordinates: four vertices that define the position of the detector. The format is: P1_x,
P1_y, P2_x, P2_y, P3_x, P3_y, P4_x, P4_y. Their values must respect the limits of both
the X axis (0..2559) and the Y axis (0..1919).
Additional parameters for speed detectors:
●
CalculateMetrics: enables the calculation of speed and length. 0, disabled; 1, enabled.
●
CameraDistance: horizontal distance between the unit and the detector; in millimetres.
●
Length: detector length; in millimetres.
6.2. Simulation configuration
To prepare a simulation, a "virtual lane" must be created. This means creating a
representation of a lane where you can define all the events (vehicle movements).
Simulated unit is focusing on four lanes from zenith position. The resulting image, 640 pixels
wide and 480 pixels long (like a real SmartLoop
®
TS unit) contains four identical lanes of 25
meter wide and 4.5 long. Vehicles always drive on the centre of the right lane but the driving
direction can be defined by the user.
Quercus Technologies
199