QuercusVL Programming Manual
●
Time: time showed with format hh:mm:ss.us
(hours:minutes:seconds:microseconds).
●
Video: information about the video geneated (if video generation is enabled).
●
Filename: file name of the video recording.
●
InitTimestamp: time stamp of the start of the video capturing.
●
Seconds: showed in seconds since 00:00h of 01-01-1970.
●
USecons: microseconds since the second Seconds (previous field). For
better accuracy.
●
Date: date formatted as yyyy-mm-dd (year-month-day).
●
Time:
time
formatted
as
hh:mm:ss.us
(hours:minutes:seconds:microseconds).
●
EndTimestamp: time stamp of the stop of the video capturing.
●
Seconds: showed in seconds since 00:00h of 01-01-1970.
●
USecons: microseconds since the second Seconds (previous field). For
better accuracy.
●
Date: date formatted as yyy-mm-dd (year-month-day).
●
Time:
time
formatted
as
hh:mm:ss.us
(hours:minutes:seconds:microseconds).
●
Duration: video duration; in miliseconds.
●
Width: width of image in the video; in pixels.Incidence: contains all data
from the incidence
●
Height: height of the image in the video; in pixels.
●
Framerate: frames per second of the video file.
●
Speed: approximated speed of the vehicle that generated the incidence; in
kilometres per hour. If speed calculation was not possible, the value will be -1.
●
ElapsedTime: time elapsed since the traffic light went red until the incidence
generation; in milliseconds.
●
AmberLightTime: time spent with amber light active, before turned to red and
generated the incidence; in miliseconds.
●
DelayTime: minimum time elapsed since the red light activation to the creation
of the incidence for this to be considered as valid; in milliseconds. User
configured.
<?xml version="1.0" encoding="UTF-8"?>
<Incidence>
<Id>3</Id>
<Type>RED_LIGHT_VIOLATION</Type>
<Unit>1</Unit>
Quercus Technologies
221