Quasimidi CYBER-6, Руководство пользователя

Страница: 35 / 63

35
Changing the groove-settings Groove This parameter changes the grid of the quantizing,
so that shuffle- and swing-quantizings become
possible. The grid of quantizing is global and is
valid for all tracks of a pattern, it is stored in each
pattern. 8th an 16th grooves are possible. For
each measure four different intensities are
possible, they are indicated in percent.
For your further exercises you should choose an unused pattern if you don´t want to lose one of the already
existing patterns. Of course you can also erase patterns if you don´t want to keep the example-patterns.
Unused patterns are marked - as mentionned before - with an asterisk.
| 1> SEQUENCER
Pat:10*CLEAR Speed:120 Groove:16 0
If you confirm this selected free pattern with the “ENTER”-button you will receive the following submenu:
Sequencer: Pattern Format
measure length: 4/4
With the “+/-” - Tasten you can set the desired measure. Therefore the CYBER-6 allows the following
values:
2/4 5/8
3/4 7/8
4/4 9/8
5/4
After you have confirmed again by pressing the “ENTER”-button the pattern is formatted and can be
treated and played in now. Set the tempo. The settings that can be made on the following page of the
display are valid for the whole sequencer:
< 2> SEQUENCER Clock:OFF Sync:INT
Metr: ON Chan:A10 Note:F#2
Here, on this page, the synchronization of the sequencer and the metronome are set.
desired operation name description/explanation
sending the MIDI-clock-signal Clock The sequencer can - if desired - send
MIDI-clock-signals for the synchronization with
other sequencers or drum-machines. Therefore the
parameter clock has to be switched “ON”. If this
parameter is switched “OFF” the sequencer sends
no MIDI-clock-signals. This is very helpful
feature for the transfer of patterns or song-chains.
pattern oriented parameters