48
Chain programming
Now you´ll learn how to program.a new chain. You can select one example chain and change the param-
eters or you can start from the beginning with a new chain.
Before you start buggering around with this, you should have programmed at least a few own patterns and
/ or masterkeyboard programs. Or simply use the pre-programmed stuff. First you should pick an empty
chain. They are marked with an “*”, except for chain 1, which has “*” no matter if it´s empty or not. After
confrimation of your choice, you´ve got a new chain which you can edit: move the cursor until “EDIT” is
highlighted and press [ENTER].
| 1> CHAIN-EDIT Speed:120 DEL INS
Step: 1 MKB: = 1 SPLIT1 PAT: 1 Bars: 0
The last step is the end-marker and is automatically generated by the CYBER-6. The sequencer is stopped
at the end of a chain. For this reason you´ll always find the end-marker at the end when selecting steps. In
the following list you see the parameters of the first edit-page of the Chain-edit menu:
Chain-program-
ming
chain-parameter
name
description
Step number
Step
The step number can be entered here, so you can
jump to any of the steps in the chain.
Masterkeyboard program number
MKB
Here you can enter the number of the
masterkeyboard program to use in the step. If you
want to keep the program, select “NoChange” to
avoid unnecessary changes.
Pattern change
PAT
Select the pattern for the current step. Again, select
“NoChange” if you do not want to change it.
Number of bars of the current chain-step
Bar
Select a number between 0 and 99 for the number
of bars you want the chain be running. If you select
"0" the step will run endless until you select the
next step in the Chain-play-mode.
Speed
Speed
The speed for the entire chain.
Delete
DEL
Deletes the current step. The following are moved.
Insert
INS
Inserts one step at the current position. The
following steps are moved. The inserted step is a
copy of the current one. This function is quite
useful for creating a number of similar steps, which
can be muted and / or transposed later on.
With the page-dial you can select the second sub-menu of the chain-edit menu:
< 2| 11111111 Mute
Step: 1 Transp:C 1 Keyb-Transp:-----
chain-Parameter
name
description
Step number
Step
Select the step number you want to edit. You may
not insert steps on this page.
The following parameter are selectable in the second sub-menu:
Содержание CYBER-6
Страница 1: ...1 B E D I E N U N G S H A N D B U C H CYBER 6 The Realtime Enhancer...
Страница 2: ...2...
Страница 62: ...62 Warranty card...
