Quasimidi CYBER-6, Руководство пользователя

Страница: 21 / 63

21
Assigning the realtime-controllers
We have already attributed MIDI-controllers to the individual modulation-sources. This facilitates the
programming of new patches if one wants to use this routing. If you prefer another standard -
routing, you should at first make a certain basis - program, that should always be called up before the
preparing of a new program. On the following page you see in the index, which MIDI - controllers are sent
by the modulation-sources of the CYBER-6 if you not yet call up a covered program ( “Enhanc x” ).
We have already attributed MIDI-controllers to the individual modulation-sources. This facilitates the
programming of new patches if one wants to use this routing. If you prefer another standard -
routing, you should at first make a certain basis - program, that should always be called up before the
preparing of a new program. On the following page you see in the chartlist, which MIDI - controllers are
sent by the modulation-sources of the CYBER-6 if you not yet call up a covered program ( “Enhanc x” ).
MIDI-Message Functions
Channel Aftertouch Aftertouch/Dynamic of pressure
Controller #1-#31 - therefrom
are determined: Modulation
(#1), Breath (#2), Foot-Control
(#4), Portamento-Time (#5),
Data Entry (#6),Volume (#7),
Balance (#8), Panorama (#10),
Expression (#11), General
Purpose (#16-19) Some of these controllers have determined functions. Corresponding to
that they are figured in the display.
Controller #32-#63 - normal
LSB for #0-#31 Usually these controllers are used for sending the LSBs of the controllers
#0-#31. This would make possible an extreme expansion of the resolution
of the first 32 controllers. As this feature is not implemented in any
well-known device and otherwise some manufacturers use these
controller-numbers in another way, we defined them as conventional
controllers. Due to that Owners of the Advanced Memorymoog will be
grateful to us.
Controller #70-#79 - defined:
Sound Variation (#70),
Timbre/Harmonic Content
(#71), Release Time (#72),
Attack Time (#73), Brightness
(#74), the rest is not specified Sound-Controller - According to the Midi-specification these controllers
are used for the controlling of parameters.
Controller #80-#95 - therefrom
are determined: General
Purpose (#80-#83), Effect
Depth 1-5 (#91-#95) Further Midi-Controllers
NRPN-Controller (#98 LSB,
#99 MSB): the following
parameters are to be used with
the CYBER-6: Vibrato Rate,
Vibrato Depth, Vibrato Delay,
CutOff-Frequency, Resonance,
Attack, Decay, Release,
Drum-Instrument-Pitch,
Drum-Instrument-Level,
Drum-Instrument-Panorama,
Drum-Instrument-FX1-Send,
Drum-Instrument-FX2-Send NRPN-Controllers are used in pairs, linked with the
Data-entry-controller. The succesion of the NRPN-Controllers #98 and
#99 determines a parameter, whose value will be changed while calling
up the Data-Entry-Controller for the next time. According to the
GS-Standard the values of the NRPN-controllers are coupled together
with certain parameters of the synthesizers. These relations are equal for
all equipment corresponding to the GS-standard. The NRPN-controllers
supported by the CYBER-6 are understood by all our Synthesizers as
QUASAR, TECHNOX, RAVEN and all forthcoming developments of
QUASIMIDI.