4ms Company Spherical Wavetable Navigator Скачать руководство пользователя страница 1

Страница: 1 / 32

Spherical Wavetable Navigator

4ms Company

User Manual 1.0 – May 3, 2019

The

Spherical Wavetable Navigator (SWN)

is a six-channel synthesizer that makes it easy to create slowly

morphing drones, polyphonic melodies, evolving sequences, and rich textures. The

SWN

features six wavetable

oscillators with independent pitch, level, and waveform controls. Six LFOs (Low Frequency Oscillators) can be

used as modulation sources and/or envelopes, making it easy to add dynamic motion to your patch. Each channel

is a full voice and can be played using the top row of buttons, the internal LFOs, or note-change detection on the

1V/oct jacks. The

SWN

ships with 12 three-dimensional (Spherical) wavetables and an easy interface which

allows you to record and edit custom wavetables from live audio. Open-source software for Mac, Windows, and

Linux called SphereEdit can be freely downloaded and allows you to create, edit, and convert .wav files into

Spherical wavetables to transfer into the

SWN

with an audio cable.

• Six VCOs (Voltage Controlled Oscillators), each with independent 1V/oct pitch CV and waveform selection.

• Twelve spherical wavetables, plus space for up 108 user-created wavetables.

• Quickly record, apply effects, and save your own custom wavetables from live audio (or by using free

SphereEdit software on a computer).

• Six LFOs/envelopes, each with its own output jack and controls for speed, amplitude, phase, and shape.

• Stereo audio outputs.

• Option to quantize each channel to a scale (major, minor harmonic, semitones).

• Entire state of the

SWN

can be saved into one of 108 Presets and recalled at a later time.

• Temperature-stable, high-quality pitch tracking circuitry is easy to re-calibrate and keep in tune with any

sequencer, DAW interface, or keyboard.

Waveform

Browse

Octave

Fine

LFO OUTS

Save Preset

Gain

Phase

Dispersion

Dispersion Pat.

WT Spread

Spread CV

Spread

Scale

Sphere

Содержание Spherical Wavetable Navigator

































Результаты поиска

Содержание Spherical Wavetable Navigator

Отзывы:

Похожие инструкции для Spherical Wavetable Navigator

Бренды по названию

Популярные бренды

4ms Company Spherical Wavetable Navigator, Руководство пользователя

Результаты поиска

Содержание Spherical Wavetable Navigator

Отзывы:

Похожие инструкции для Spherical Wavetable Navigator

Бренды по названию

Популярные бренды