4ms Company Spherical Wavetable Navigator страница 25 Скачать руководство пользователя

Страница: 25 / 32

Sphere Recording Mode: Overview

Sphere Recording Mode lets you create new Spheres by recording audio from

any modular or line-level signal. You can also edit and apply effects to new or

existing Spheres. Only one Sphere can be edited or created at a time.

Entering Sphere Recording Mode

To Enter Sphere Recording Mode, press the

Depth, Latitude,

and

Longitude

knobs at the same time. The three navigation knobs will turn orange. The

Sphere that you’ve selected for channel 1 load onto all six channels. Any

Dispersion

in play

will clear.

LFO->VCA

will turn off on every channel. The

current navigation position of all channels will snap to the nearest waveform.

You can immediately begin editing the Sphere by applying effects, or you can

start by recording a new Sphere. See Tutorial 5: Creating Your Own Spherical

Wavetables (page 9) for a step-by-step guide to recording a Sphere.

Sphere Recording Mode Controls

Some of the knobs, buttons, jacks, and lights are disabled or change function in Sphere Recording Mode:

Record Button

The

LFO->VCA

button becomes the

Record

button and will flash red. When you

push this button, the

SWN

will wait until it detects a signal on the

Waveform In

jack

before starting to record. When it’s waiting for a signal the button will flashing

rapidly and the light next to the

Waveform In

jack will flash red. As it records, the

light ring will fill up with red lights. After 2.5 seconds have passed, the recording

process will stop automatically; the recorded audio will split up into 27 waveforms

and all the channels will play the first waveform.

Monitor Button

The

LFO Type

button becomes the

Monitor

button and flashes green. When you

press this button, the audio from the

Waveform In

jack will be routed to the

Audio

OUT

jacks. This allows you to monitor or cue your audio input before recording.

The button will glow solid green while monitoring.

Tune to Test Tone

Pressing

Fine + LFO Type

will turn on monitoring while simultaneously outputting a

86.1Hz reference tone. If your audio source is a VCO (or something else that

produces waveforms with a definite fundamental frequency), then tuning the

fundamental frequency of the audio source to the reference tone will ensure that

the recorded waveforms are complete waveforms. Using this feature is optional

(and many interesting waveforms and effects can be obtained without tuning).

Browse and Navigation Knobs

The

Browse, Latitude, Longitude,

Depth

knobs will jump between exact

waveforms, rather than morphing. By holding down

Fine

while turning any of these

knobs, one can temporarily morph between waveforms.
Pushing and turning the

Browse

knob no longer selects the Sphere, but instead

changes the

Waveform Shift

amount (see next section). The CV jack for Sphere

selection is disabled.
The CV jacks for

Browse, Depth, Latitude, Dispersion,

and

Dispersion Pattern

will snap to exact waveforms but otherwise behave as normal.

Dispersion, Dispersion Pattern, and WT Spread Knobs

Dispersion

and

Dispersion Pattern

can be used as normal, but the dispersion

amount will be cleared as soon as the

Browse, Latitude, Longitude,

Depth

knobs is turned.

Dispersion

will snap to exact waveforms unless

Fine

is held

down. The

WT Spread

knob and CV jack are disabled.

Page of

Monitor Input

Fine

Tune to Test Tone

Record

Push all three knobs

Enter Sphere Recording Mode:

Содержание Spherical Wavetable Navigator

































Результаты поиска

Содержание Spherical Wavetable Navigator

Отзывы:

Похожие инструкции для Spherical Wavetable Navigator

Бренды по названию

Популярные бренды

4ms Company Spherical Wavetable Navigator, Руководство пользователя

Результаты поиска

Содержание Spherical Wavetable Navigator

Отзывы:

Похожие инструкции для Spherical Wavetable Navigator

Бренды по названию

Популярные бренды