46
Introduction
6
Engage the robot kickstand as follows:
a. Using the yellow picker handle (see
Figure 22
), pull the picker toward the top of the robot just
enough so that the yellow locking lever clears the bar halfway up the vertical length of the robot.
b. Push the yellow locking lever into the locked position, then lower the picker until it locks into
position (see
Figure 23
).
Figure 22
Lifting the Picker
On the video, this step can be found from 3:20 to 3:34
Picker Lift
Handle
Содержание Scalar i6000
Страница 14: ...14 Introduction Figure 1 Power Rail Position in Module Two bridge clamps connect adjacent rails...
Страница 15: ...Scalar i6000 Installation Guide Super Doc 15 Figure 2 Power Rail Front 4 pin and 3 pin connectors...
Страница 23: ...Scalar i6000 Installation Guide Super Doc 23 Figure 6 Installing Bottom and Middle Racks...
Страница 24: ...24 Introduction Figure 7 Middle X Axis Gear Rack...