Chapter 2 Installation Procedures
Installing the Tabletop LTO-4 (Model B) Half-Height Tape Drive
16
LTO-4 (Model B) Half-Height Tape Drive User’s Guide
3
As required, proceed to either:
•
Installing the LTO Driver Software
on page 23
•
Registering the LTO-4 (Model B) Half-Height Tape Drive
on
page 23
Installing the Tabletop LTO-4 (Model B) Half-Height
Tape Drive
The tabletop LTO-4 (Model B) Half-Height Tape Drive is a compact
external drive that connects to the host computer through an external
serial-attached SCSI (SAS) port.
Do not attempt to install the LTO-4 (Model B) Half-Height Tape Drive
until you have reviewed
Handling Precautions and Installation
Guidelines
on page 6.
To install the tabletop LTO-4 (Model B) Half-Height Tape Drive, complete
the following procedures in the order presented:
1
Depending on the interface configuration of the drive:
2
Connecting the Tabletop Drive Interface and AC Power Cables
on
page 18.
3
Restarting the Tabletop Drive System
on page 22.
4
Installing the LTO Driver Software
on page 23, if required.
IF the drive interface is . . . THEN . . .
parallel Small Computer
System Interface (SCSI),
proceed to
Configuring the
Tabletop Parallel SCSI Tape Drive
in
the following subsection to
configure the SCSI ID.
serial-attached SCSI (SAS),
there is no need to configure the
SCSI ID, as SAS is a point-to-point
architecture. Skip to
Connecting
the Tabletop Drive Interface and AC
Power Cables
on page 18.
Содержание LTO-4 (Model B)
