Chapter 3 Operation
Understanding the Front Panel Display
LTO-4 (Model B) Half-Height Tape Drive User’s Guide
29
Ready OFF, others ON.
Firmware is being
reprogrammed.
None.
Do not reset or power cycle the drive.
Clean FLASHING.
(Other LEDs
may be flashing.)
The drive requires cleaning.
Load an Ultrium Universal cleaning cartridge to clean
the heads. If the Clean LED is still flashing when you load
a new
or known data cartridge after cleaning, call for
service.
Ready FLASHING and Clean
ON
. (Other LEDs may be
flashing.)
Cleaning is in progress.
None. The cleaning cartridge will eject on
completion.
The cleaning cycle can take up to 3 minutes.
Tape Error FLASHING
. (Other
LEDs may be flashing.)
The drive believes the current
tape or the tape just ejected is
faulty.
Unload the tape cartridge. Make sure that it is a valid
format: an Ultrium data cartridge or Ultrium universal
cleaning cartridge.
Reload the cartridge. If the Tape Error LED still flashes
or starts flashing during the next backup, load a new
or known, good cartridge.
If the Tape Error LED is now off, discard the ‘suspect’
tape cartridge. If it is still on, call for service.
Tape ejects immediately and
Tape Error FLASHES
The tape cartridge memory (CM)
may be faulty.
Write-protect the cartridge by sliding the red switch
on the cartridge. The tape can be loaded and the
data read. Once the data is recovered, discard the
cartridge.
LED Condition
Action Required
Содержание LTO-4 (Model B)
