Quantum LTO-4 (Model B), Руководство пользователя

Страница: 46 / 98

Chapter 3 Operation
Using LTO Tape Cartridges
30 LTO-4 (Model B) Half-Height Tape Drive User’s Guide
Using LTO Tape Cartridges
Loading a Tape
Cartridge
To load an Ultrium tape cartridge into the LTO-4 (Model B) Half-Height
Tape Drive, gently insert the cartridge into the slot and then either:
• Push the cartridge further into the drive until the drive senses the
cartridge and automatically completes the load operation.
• Use a library or host command to complete the load operation.
Unloading a Tape
Cartridge
To unload an Ultrium tape cartridge from the LTO-4 (Model B) Half-
Height Tape Drive, either:
• Use a library or host command to unload the tape.
• Press the Eject button on the front panel of the drive.
Caution: After you press the Eject button, several minutes can elapse
before the drive ejects the cartridge. Do not power down
the tape drive or the host computer until the drive has
completely ejected the cartridge.
Drive Error FLASHING.
(Other
LEDs may be flashing.)
The drive mechanism has
detected an error.
Load a new cartridge. If the error persists, power
cycle or reset the drive.
If the Drive Error LED remains on, call for service.
Drive Error and Ready ON with
Tape Error and Clean OFF.
Sequence alternates repeatedly.
The drive has a firmware error.
Power cycle or reset the drive. If the sequence
reoccurs, upgrade the firmware. If the condition
persists, call for service.
LED Condition Action Required