Quantum LTO-4 (Model B), Руководство пользователя

Страница: 28 / 98

Chapter 2 Installation Procedures
Installing the Internal LTO-4 (Model B) Half-Height Tape Drive
12 LTO-4 (Model B) Half-Height Tape Drive User’s Guide
Mounting the Internal
Tape Drive
You can mount the internal LTO-4 (Model B) Half-Height Tape Drive
either horizontally or vertically, but not upside down (see figure 4 ).
Figure 4 Acceptable Mounting
Orientation
Mount the drive in a 5.25-inch, half-height drive bay as follows:
1
As required:
a Save and close your open files and terminate all running
applications.
b Shut down the workstation or server system.
c
Disconnect the system AC power cord from the facility AC
power receptacle.
2 Remove the cover from the workstation or server system.
Note: See your computer manufacturer’s instructions for the proper
procedures to remove the cover.
3 Select an available 5.25-inch half-height bay and, if required,
remove the bay cover.
IF you mount the drive . . . THEN the . . .
horizontally, base of the drive must be within 15
degrees of horizontal.
vertically, side of the drive should be within 5
degrees of horizontal.
YES YES YES NO