Quantum LTO-4 (Model B) Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 98

background image

Preface

LTO-4 (Model B) Half-Height Tape Drive User’s Guide

xiii

Related Documents

The following subsection identifies the primary documents that are

related to the LTO-4 (Model B) Half-Height Tape Drive.

Standards Conformance

The Small Computer System Interface is described in standards that

include several versions and a number of individual documents. The

original Small Computer System Interface Standard, X3.131-1986, is

referred to as SCSI-1. SCSI-1 was revised, resulting in the Small

Computer System Interface – 2 (X3.131-1994), referred to as SCSI-2. The

set of SCSI-3 standards are collectively referred to as SCSI-3. The

applicable ANSI standards are as follows:

• INCITS Technical Committee T10 (SCSI Storage Interfaces) Standards:

• SCSI Architecture Model – 2 (SAM-2) INCITS 366-2003
• SCSI Architecture Model – 3 (SAM-3) INCITS 402-2005
• SCSI Architecture Model – 4 (SAM-4) in development
• Automation/Drive Interface – Commands (ADC) INCITS 403-

2005

• Automation/Drive Interface Commands (ADC-2) in development
• Automation/Drive Interface – Transport Protocol (ADT) INCITS

406-2005

• Automation/Drive Interface – Transport Protocol – 2 (ADT-2) in

development

• Fibre Channel Protocol for SCSI (FCP) INCITS 269-1996
• Fibre Channel Protocol for SCSI, Second Version - 2 (FCP-2)

INCITS 350-2003

• Fibre Channel Protocol for SCSI, Third Version - 3 (FCP-3) INCITS

416-2006

• Fibre Channel Protocol for SCSI, Fourth Version - 4 (FCP-3) in

development

• SCSI-3 Medium Changer Commands (SMC) INCITS 314-1998
• SCSI Media Changer Commands – 2 (SMC-2) INCITS 382-2004
• SCSI Media Changer Commands – 3 (SMC-3) in development
• SCSI Parallel Interface – 3 (SPI-3) INCITS 336-2000

«
...
11
12
13
14
15
...
»

Содержание LTO-4 (Model B)



































































































Отзывы:

Нет отзывов

Похожие инструкции для LTO-4 (Model B)

Garage Gator GGR220

Бренд: V-Bro Products Страницы: 18

Бренд: Overland Storage Страницы: 6

DTLA-305040 - Deskstar 41.1 GB Hard Drive

Бренд: IBM Страницы: 212

MY PASSPORT EDGE

Бренд: Western Digital Страницы: 77

Бренд: AIC Страницы: 101

1 GB Microdrive Storage Card

Бренд: IBM Страницы: 2

Бренд: Seagate Страницы: 2

Бренд: Samsung Страницы: 6

Бренд: Samsung Страницы: 7

Бренд: Samsung Страницы: 20

Бренд: Samsung Страницы: 54

Бренд: Samsung Страницы: 95

Бренд: Samsung Страницы: 245

Solaris Cluster 3.3 with StorageTek RAID Arrays

Бренд: Oracle Страницы: 30

Бренд: Oracle Страницы: 176

Neutrino SK-2500

Бренд: Akitio Страницы: 8

Бренд: OLT Страницы: 35

Бренд: Sony Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды