Quantum LTO-4 (Model B), Руководство пользователя

Страница: 34 / 98

Chapter 2 Installation Procedures
Installing the Tabletop LTO-4 (Model B) Half-Height Tape Drive
18 LTO-4 (Model B) Half-Height Tape Drive User’s Guide
Figure 8 Tabletop Parallel SCSI
ID Selector Switch
Note:
Parallel SCSI controllers and host adapters generally use ID 7. In
some systems, the boot drive uses ID 0 or ID 1. Avoid
configuring the LTO-4 (Model B) Half-Height Tape Drive to these
SCSI IDs.
After configuring the parallel SCSI ID, proceed to Connecting the
Tabletop Drive Interface and AC Power Cables in the following
subsection.
Connecting the
Tabletop Drive Interface
and AC Power Cables
As shown in figure 9 and figure 10 , the rear panels of the tabletop LTO-
4 (Model B) Half-Height Tape Drives have connectors for:
• Either a 68-pin parallel SCSI cable (two connectors), or a 26-pin SFF-
8088 mini-SAS style interface cable
• The AC power cable
For the tabletop parallel SCSI drive, either SCSI connector can be used as
a SCSI IN or SCSI OUT connection. This means you can use either
connector to attach the drive to a host computer or to another parallel
SCSI device.
Parallel SCSI ID selector switch