Error Codes
The error codes are listed in numerical sequence by their
Fault Symptom Code
(FSC) in the tables that follow. If a persistent error condition prompts you to call
your Technical Support representative, be sure to supply the code information
to help identify the problem.
Error
Code
Display
Message
Description
Suggested Action
Most likely cause
(for guidance
only)
01ZZ Diagnostic
number ZZ
failed.
The diagnostics
number ZZ
failed.
Reboot the loader and retry the
operation.
(This error code is
reserved for
future use)
0200 Initialization
of
the robotics
failed.
The robotics
failed to
complete the
calibration or the
inventory
sequence.
1. Reboot the loader and retry the
operation.
2. Verify that the magazines are
locked.
3. Turn off the loader and try to
remove the magazines by using
the emergency eject pin.
4. Contact your service
representative.
Cartridge
blocked, faulty
robotics
1001 Failed
moving
the robotics.
The robotics
was not able to
move.
Reboot the loader and retry the
operation.
Cartridge
blocked, faulty
robotics
1101-
1108
Failed to stow at
slot 01 .. 08
The robotics is
not able to stow
the cartridge to
the magazine
1. Reboot the loader and retry the
operation.
2. Remove the magazine if
possible. Remove all cartridges.
3. Verify that the cartridge is not
damaged.
4. Insert empty magazines.
5. Power cycle the loader.
6. Retry the operation.
7. Retry the operation with a new
magazine.
Defect robotics,
defect magazine,
defect cartridge
1109
Failed to stow at
slot 09
Failed to insert
cartridge in drive
1. Reboot the loader and retry the
operation.
2. If failure persists, insert the
cartridge into a magazine slot,
remove the magazine and verify
that the cartridge is not damaged.
1201
-
1208
Failed to fetch at
slot 01 .. 08
The robotics is
not able to fetch
the requested
cartridge from
the magazine
1. Reboot the loader and retry the
operation.
2. Remove the magazine if
possible. Remove all cartridges.
3. Verify that the cartridge is not
damaged.
4. Insert empty magazines.
5. Power cycle the loader.
6. Retry the operation.
7. Retry the operation with a new
magazine
Defect robotics,
defect magazine,
defect cartridge
1209
Failed to fetch at
slot 09
Failed to eject
cartridge from
drive
1. Reboot the loader and retry the
operation.
2. Try to eject the cartridge from
Defect drive or
robotics. Defect
cartridge.
FastStor 1 Installation and User Guide
63
Содержание FastStor 1
Страница 1: ...FastStor 1 Installation and User Guide Advanced Digital Information Corporation...
Страница 8: ...2 FastStor 1 Installation and User Guide...
Страница 14: ...8 FastStor 1 Installation and User Guide...
Страница 30: ...Figure 4 5 The Complete Menu Tree 24 FastStor 1 Installation and User Guide...