Quantum FastStor 1, Руководство пользователя

Страница: 16 / 78

cartridge labels)
There may be variations of this list.
Note: The FastStor 1 contains no cartridges before shipment.
Step 2. Installing the FastStor 1 in a Rack
The FastStor 1 is designed for use in a 19” rack system using 1U of rack space.
The length of the power cord and the SCSI cable may restrict the placement.
Attention:
The FastStor 1 is designed to operate in a horizontal position. Do not
attempt to operate the FastStor 1 in any other position than horizontally. Also make
sure that:
•
The airflow around the front and back of the FastStor 1 is not obstructed.
•
There is a minimum of 60cm free space in front of the unit to allow the
operator to safely remove the magazines.
•
The display and operator controls are easily accessed.
•
The FastStor 1 is away from the floor and in a clean environment with
temperatures within specifications. See Appendix A.
The Rack Mounting Kit includes the following items:
•
Rail Left Assembly
•
Rail Right Assembly
•
Screw M6x12 (6 pieces)
•
Screw M5x8 (2 pieces)
Recommended mounting tools:
•
Folding rule or tape measure
•
Screwdriver
•
7 mm open-end wrench
Note:
The rails are mounted to the loader during transportation. Before mounting
the rails into the rack, dismount the rails from the loader and remove the spacers
between the rails and the loader.
10 FastStor 1 Installation and User Guide