Quantum FastStor 1, Руководство пользователя

Страница: 37 / 78

Select button. The loader will remain in its ready state when this menu is selected.
The View Data menu contains the values assigned during device setup (see Setup
Menu), and also statistical data related to the drive and the robotics. The view-only
fields display data that can be changed from the Setup menu only. If you select the
Change button and the robot is idle, a dialog appears where the value may be
changed. This requires entering a password if the Loader Password system is
enabled.
Item name Description
FastStor 1 info This menu item gives access to the FastStor 1 view
menu.
SCSI info This menu item gives access to the SCSI bus view
menu. Both the FastStor 1 and the Drive SCSI bus
parameters are available here.
Remote
Management info This menu gives access to the Selected IP addresses
and masks. This menu also shows the MAC address
of the unit.
Statistics This menu item gives access to the loader’s view
menus internal count and statistics values.
FastStor 1 Info
An overview of the possible values for each FastStor 1 setting is listed in the
following table.
Item name Legal values
.
Default value
Cleaning Slot Defined cleaning slot,
Disabled Disabled
Barcode Reader Enabled, Disabled Enabled if installed, else
Disabled
Loader Serial No. Loader Serial number. ---
Loader FW
revision FastStor 1 FW id and
revision xx.yy
Loader Vendor ID Current Inquiry Vendor Id “ADIC”
Loader Product
ID Current HW/FW Product Id AT3200-1R LTO2
Loader SCSI ID SCSI Id 0 to SCSI Id 15 SCSI ID = 4
Loader Parity Disabled, Enabled Enabled
Loader Slots
State View status for each loader
slot Not applicable
Loader
personality FastStor 1 FastStor 1
Audible Alarm Enabled, Disabled Disabled
FastStor 1 Installation and User Guide 31