![background image](http://html2.mh-extra.com/html/quantum/faststor-1/faststor-1_user-manual_3568628048.webp)
Addr. mode
to DHCP mode.
3. Via the front panel, first set
Setup
→
Remote management
→
Access
control
→
Allow remote man.
to “Not allowed” and select “OK.” Then set
the same value to “Allowed” and select “OK.” This will restart the networking
subsystem. Obtaining a new IP address may take some time if the FastStor
1 is in DHCP mode.
4. Check the IP address via the front panel by accessing either
View Data
→
Remote man. info
→
Sta IP Addr. state
or
View Data
→
Remote man.
info
→
Dyn IP Addr. state
, depending on whether the FastStor 1 is in static
or dynamic IP address mode.
Remote Management Web Pages
Most of the operations you can perform from the front panel can also be
performed remotely using Web Administration. The Remote Management
interface provides access to loader and drive status and statistical operation
information.
The Web pages include a
navigation menu making it
easy to use, see Figure 5.1.
Status
Settings
Personalization
Network
SCSI-ID
Cleaning
options
Command
Maintenance
Diagnostics
Debugging
FW upgrade
Figure 5.1 Navigation Menu
Information Boxes
All the Remote Management web pages show FastStor 1 and drive information.
This information includes:
•
FastStor 1 information containing model, serial number, firmware
version, cumulative power-on time and present activity of the loader.
•
Drive information containing technology, serial number, firmware version
and activity
42
FastStor 1 Installation and User Guide
Содержание FastStor 1
Страница 1: ...FastStor 1 Installation and User Guide Advanced Digital Information Corporation...
Страница 8: ...2 FastStor 1 Installation and User Guide...
Страница 14: ...8 FastStor 1 Installation and User Guide...
Страница 30: ...Figure 4 5 The Complete Menu Tree 24 FastStor 1 Installation and User Guide...