Quantum FastStor 1, Руководство пользователя

Страница: 21 / 78

Slide the FastStor 1 gently out of the rack. Note that the FastStor 1’s weight is 32
pounds.
Step 3. Connecting Power Cable
Before connecting the FastStor 1 to your host computer system, you should run the
unit’s self-diagnostic test. This preparation requires power to the FastStor 1. Follow
these steps to perform this test:
1. Use the power cables from the accessories included in the shipment. Make
sure you select the power cord suited for your power system.
2. Plug the power cable into the rear of the FastStor 1 (see figure 3.8). Plug
the other end of the cable into a properly grounded electrical outlet.
Note
: Reliable grounding depends on grounding in the AC electrical outlet in which
the FastStor 1’s power cable is connected. For security, a 250V 2A (H) fuse is
located near the power switch.
3. Turn on the FastStor 1 by
switching the Power
Switch to “I”.
If the transport lock is
present, the loader will
detect this and instruct the
user to remove it. See
next step.
Figure 3.8 Power switch, fuse holder and
power cord connection
FastStor 1 Installation and User Guide 15