Quantum FastStor 1, Руководство пользователя

Страница: 32 / 78

two digits. (The maximum value allowed in this dialog is “255” within
each group.) If, however, “2” is selected, only values between “0” and
”5” are available in the second digit. If a value between “0” and “4” is
selected for the second digit, “0” to “9” is available for the third, but if
“5” is selected for the second digit, only “0” to “5” is available for the
third one.
Or
the user selects the value “199” in one group in the above dialog,
then presses the “Next Digit” button until the “1” in “199” is selected,
and increments it to “2,” so the group shows “299.” Since this is an
illegal value, when the user selects the “Next Digit” or the
Ok to leave
the group, the value is changed to “255” and the focus is repositioned
to the “2” in the first position of the group.
Dialogs, Predefined Options
The second form of dialog allows the operator to select between a predefined set
of options, which can be shown on-screen simultaneously, as when selecting a
magazine slot number, see Figure 4.8.
To select a cartridge and move it from a magazine slot to the drive or vice versa, a
slightly different dialog is used:
Ok Cancel
Load to drive
From Slot:
1
35
3 4
Figure 4.8 Slot dialog layout.
Here, the right and left arrows select the digit to load from. Ok accepts the cartridge
selected, and Cancel aborts the operation.
Figure 4.9 shows the third form, where the operator can select predefined options
that can be shown only one at a time.
Ok Cancel
Barcode scan
Enabled
3 4
Figure 4.9 Predefined options, shown one at the time.
Here, the user can scroll through a set of options one at a time by using the left
and right arrow buttons. Only one option is shown at a time. In the example above,
the user can select either “Enabled” or “Disabled” mode.
This kind of menu also has a Cancel function.
26 FastStor 1 Installation and User Guide