Quantum DXi6902 Скачать руководство пользователя страница 35

Страница: 35 / 242

Chapter 1: DXi6902 Basic Operations

DXi6902 Node

Quantum DXi6902 User’s Guide

Figure 7 LEDs for 10 GbE
Adapter With Dual Optical or
Twinax Ports

Node Power Supply

Indicators

Each power supply has an illuminated translucent handle that serves as

an indicator to show whether power is present or whether a power fault

has occurred (see

Figure 8

•

Not lit -

Indicates power is not connected.

•

Green

- Indicates a valid power source is connected to the power

supply and that the power supply is operational.

•

Flashing amber

- Indicates a problem with the power supply.

•

Flashing green

- When hot-adding a power supply, this indicates

that the power supply is mismatched with the other power supply.

Replace the power supply that has the flashing indicator with a

power supply that matches the capacity of the other installed power

supply.

Caution:

All power supplies are hot swappable. When replacing

power supplies, never remove more than one power supply

at a time from the system. Also, before you remove one

power supply, make sure the other power supply is

operating correctly (indicator handle is green).

Port 1

Link indicator

Port 2

Activity indicator

Link indicator

Содержание DXi6902



















































































































































































































































Результаты поиска

Содержание DXi6902

Отзывы:

Quantum DXi6902, Руководство по обслуживанию на месте, Страница: 35 / 242

Результаты поиска

Содержание DXi6902

Отзывы: