Quantum DXi6902 Скачать руководство пользователя страница 32

Страница: 32 / 242

Chapter 1: DXi6902 Basic Operations
DXi6902 Node

Quantum DXi6902 User’s Guide

Node Hard Drive Carrier

Indicators

Each hard drive carrier has two LED indicators (see

Figure 5

• Drive activity indicator (green)

•

Flashing

- Indicates hard disk drive activity.

• Drive failure indicator (green and amber)

•

Off

- Drive ready for insertion or removal

Note:

The drive status indicator remains off until all hard

drives are initialized after system power is applied.

Drives are not ready for insertion or removal during this

time.

•

Blinks green two times per second

- Identify drive/preparing

for removal

•

Blinks green, amber, and off

- Drive predicted failure

•

Blinks amber four times per second

- Drive failed

•

Blinks green slowly

- Drive rebuilding

•

Steady green

- Drive online

•

Blinks green three seconds, amber three seconds, and off

three seconds

- Rebuild aborted

Note:

If a drive fails, you will be notified by a service ticket in the

remote management console.

Power supply (PSU2)

750 watt hot-swappable power supply.

Optional 2 x 10 GbE

(SFP+) Ethernet ports

Optional 4 x 1 GbE

Ethernet ports

For data ingest/read.

Item

Indicator, Button, or

Connector

Icon

Description

Содержание DXi6902



















































































































































































































































Результаты поиска

Содержание DXi6902

Отзывы:

Quantum DXi6902, Руководство по обслуживанию на месте, Страница: 32 / 242

Результаты поиска

Содержание DXi6902

Отзывы: