Chapter 3 DXi3500 and DXi5500 Remote Management
Configuration
Quantum DXi3500 and DXi5500 User’s Guide
44
2
Domain/Workgroup Name
- Enter the
Workgroup
name. This can be the
name of an existing workgroup or a new workgroup (examples:
Workgroup
or
Sales
).
3
Click
Apply
Joining a Windows Domain
3
It is necessary to synchronize the server clock and the ADS server so that
the time difference is less than 300 seconds. This can be done by having
both servers use the same NTP server. Once the clocks have been verified:
1
Edit the
Windows Domain
information as desired (see below):
•
Domain Type
- Select
Active Directory
•
Domain/Workgroup Name
- Enter the domain name.
•
Primary Domain Controller
- Enter the fully qualified name of the
Primary Domain Controller (PDC). Choose one of these options
•
Use DNS discovery
- Let the PDC be discovered automatically
• Or enter the fully qualified name, or the IP address, of the PDC.
•
Organization Unit
(optional) - Enter the name of the organizational
unit in the domain. This is the organization of which the DXi will
become a member.
•
Administrator Name
- Enter
Administrator
or any user who has the
right to join a domain. By default any user belonging to the
Administrators
group or the
Domain Admins
group has the right to
join the domain. In addition, any domain user can join the domain if
he is specifically delegated this right by a member of the
Administrators
group. See
Joining a Domain using a Domain User
Credential
for an example.
•
Administrator Password
- Enter the
Administrator Password
.
Note:
When a Samba server is joined to a workgroup, the share
security is managed directly from the remote management
pages. For a CIFS share, security is provided through the
read only or read/write access to the share. By default,
when a CIFS share is created the default security setting is
to allow access for all users. Further access restrictions on
individual users can be managed from the following page:
NAS
>
Shares
>
Edit
.
