Quantum DXi3500 Скачать руководство пользователя

Страница: 144 / 201

Chapter 3 DXi3500 and DXi5500 Remote Management

Utilities

Quantum DXi3500 and DXi5500 User’s Guide

124

•

Replication Error

- A replication error indicates a severe problem has

occurred such as a replication failure.

•

Replication Warning

- A replication warning indicate a less severe

problem such as a partial replication.

•

Replication Information

- Replication information is provided for

informational purposes only such as the commencement of a

replication.

•

VTL Activity

VTL Activity indicates a change within the DXi3500/

DXi5500 system such as the recognition of new tape media.

Select the system log type(s) and click

Apply

to display the list.

Uploading Firmware

The

Firmware Upload

page is used to upload a new firmware image to the

DXi3500/DXi5500 system.

Firmware Upgrade Requirements

• All backup jobs to the DXi system must be stopped.
• Make sure that all hard drives are in a

Normal

state. Check the

Hardware

page (see

Viewing Hardware Status

on page 87).

• Disconnect all Fibre Channel or Ethernet cables NOT used for the

firmware upload.

• Make sure all space reclamation has stopped.
• Reboot the DXi3500/DXi5500 system (see

Rebooting the DXi3500/

DXi5500 System

on page 131).

Firmware Upgrade Times

• A GUI upgrade takes approximately 45 minutes.

Note:

It is possible to upgrade the DXi system firmware with

replication running. When the system reboots after the

software upgrade, the replication status will indicate

Failed

After the next scheduled replication, the indicators will return

to normal.

Note:

One Ethernet connection to the DXi3500/DXi5500 system

is required for remote management access.

Содержание DXi3500










































































































































































































Результаты поиска

Содержание DXi3500

Отзывы:

Похожие инструкции для DXi3500

Бренды по названию

Популярные бренды

Quantum DXi3500, Руководство пользователя

Результаты поиска

Содержание DXi3500

Отзывы:

Похожие инструкции для DXi3500

Бренды по названию

Популярные бренды