Chapter 5 Implementing a Data Replication Plan
Setting Up Data Replication
Quantum DXi3500 and DXi5500 User’s Guide
144
Entering the host names or IP addresses of the replication source
systems on the target system allows the target to receive replicated
data from these sources.
Setting Up the Source
DXi System
5
Once you have added the source system hostname or IP address to the
target system, you must add the target system hostname or IP address to
the source system. The source system can only replicate data to one
target.
1
Access the remote management pages on the source system.
2
From the
Replication
page, click the
Source Role
link.
The
Source Role
page displays (see
figure 80
).
Note:
You must configure the target system prior to configuring the
source. If the target system is not configured first, you will not
be able to designate the replication target.
Note:
For more information on accessing the remote
management pages, see
chapter 3, DXi3500 and DXi5500
Remote Management
.
